GunfighterCustoms

GunfighterCustoms Gunfightercustoms created by Jarrod Franklin, USMC combat vet and custom knife maker.
(19)

Custom knives, gun & magazine holsters, and tactical gear. Laser engraving services also available.

Here is a good example of a random customer request that I get from time to time.  He wanted a skinner for his Brother, ...
04/30/2020

Here is a good example of a random customer request that I get from time to time. He wanted a skinner for his Brother, who is a Marine Veteran. He also wanted to have a custom sheath made for both the knife that I made, and his Case folder.

This is a classic skinner design, and I used 440-C high carbon stainless steel for the build. The scales are jigged bone stag, with red liners. The sheath is chocolate brown kydex, with a tek-lok.

Thanks for looking!

Custom Karambit"RAPTOR"D2 high carbon steel.200" thickness8.25" overall length 3.75" blade length Custom tiger etch jobB...
04/22/2020

Custom Karambit
"RAPTOR"
D2 high carbon steel
.200" thickness
8.25" overall length
3.75" blade length
Custom tiger etch job
Black/Grey suretouch rubber/G10 scales
Custom cross-draw kydex sheath w/ Tek-lok

Whitechapel on top, Sabayan on bottom, wearing the Combat Warrior Academy colors!!
03/22/2020

Whitechapel on top, Sabayan on bottom, wearing the Combat Warrior Academy colors!!

These are a few of my favorite things....
03/07/2020

These are a few of my favorite things....

Tanto Fighter!154 CM High Carbon Stainless steel 11" OAL length .17" thickness6" Blade!Dymalux Blackwood scalesCustom mo...
03/05/2020

Tanto Fighter!

154 CM High Carbon Stainless steel
11" OAL length
.17" thickness
6" Blade!
Dymalux Blackwood scales
Custom mosaic pins
Black kydex handmade sheath

This baby went to a buddy of mine, and is #2 of a Father/Son set!

The latest C.W.A. Pekiti to go out into the world!
01/31/2020

The latest C.W.A. Pekiti to go out into the world!

Combat Warrior Academy
12/17/2019

Combat Warrior Academy

Hello All!!
I am honored to announce, we are now taking orders for the Sabayan, and Pekitit knives!
The blades are a collaboration between GunfighterCustoms and Combat Warrior Academy.

Each knife will be hand made, with your choice of handles, sheath colors, as well as the finish of the blade.

While they all will be born from the same pattern, no two will be exactly alike. You will have your very own, unique to you, custom made blade.

We will be using 154CM stainless, high carbon steel. 154CM is a very high quality, corrosive resistant, great edge holding, tough alloy steel!

The Sabayan knife is $400, which includes the sheath.
The overall length is 9", and thickness will be 3/16"

The Pekiti knife is $350, with sheath also.
The overall length is 6.5", and thickness will be 3/16"

If you have any questions, or want to order a blade, please message us here at the C.W.A page!

Thanks and have a nice day!

Jarrod Franklin a.k.a Edge
Offical C.W.A. Bladesmith and Instructor
Owner/Maker of Gunfighter Customs

Combat Warrior Academy
12/01/2019

Combat Warrior Academy

Here we have, the 1st C.W.A. blade to bear the mark. More to come!!! A version of this knife WILL be available to the public SOON!
I'm losing daylight, and the knife is not sharpened yet, I will post more pictures tmrw when I have finished doing so!
-Edge

My latest design, with some help from Mike Elliot, from Elliot Designs!CTS-204P super steel!!! Same composition as M390,...
10/02/2019

My latest design, with some help from Mike Elliot, from Elliot Designs!

CTS-204P super steel!!! Same composition as M390, and 20 CV!!!
10” overall length
5" blade
.17" thickness
Custom resin scales
3/8 custom punisher center pin
New basket weave pattern kydex sheath

This thing is bad!!! Super sharp, and light-weigt!
Get yours in any steel and handle setup that you want!!

Moto-Monday!Here is a fine example of a Gunfighter Customs blade, a drop point EDC fixed blade!This beauty is made from ...
09/17/2019

Moto-Monday!
Here is a fine example of a Gunfighter Customs blade, a drop point EDC fixed blade!
This beauty is made from CPM-3V!!

Overall length - 7.5"
Blade length - 3.85"
Thickness - .15"
3/16" hand milled serrations
1/16" hand milled jimping (thumb grooves)
OD Green textured g10 scales
Electro-etched finish
10mm Gold chainring bolts
Custom MARPAT kydex sheath

I'm very happy with this rig, it is perfectly suited for every day carry, for work, self-defense, or hunting/camping. I try to be as versatile with my designs as possible, and this is a fine example of that!

This one already has a home, but I can get one in the works for YOU, just hit me up!!

Thank you for looking!!!

HammerHawk17" length 7" head3" cutting blade2.75" hammer.187" thick 1095 high carbon tool steel1" diameter S7 tool steel...
09/12/2019

HammerHawk
17" length
7" head
3" cutting blade
2.75" hammer
.187" thick 1095 high carbon tool steel
1" diameter S7 tool steel hammer, cnc made
Black canvas micarta scales

I was commissioned to build a tomahawk, one that is inspired by the tomahawk from the movie, The Patriot. You know, from the scene where Mel Gibson turns a red coat's head into a pile of hairy spaghetti. This is what came out, and I couldn't be happier with it!

I wanted the hammer end to be really nice, so I reached out to my Brother, Andrew Fischer, and he and I designed it, and he had it made on a big fancy CNC machine. As I don't yet have a lathe, much less a CNC lathe! I then had the hammer tig welded onto the back of the tomahawk.

The added weight from the hammer is welcome, and it adds to the amount of ass that will go into your cuts. The micarta handles feel great, and are very comfortable. I milled some traction grooves into them, for protection against slippage during a swing. The scales are bolted on by 10mm chainring bolts, which are made from steel.

The HammerHawk is nimble enough for hand to hand combat, and heavy duty enough to fell a decent size tree, and the all steel construction ensures that this beast is stronger than any wooden or fiberglass handled tomahawk. I Absolutely love this thing, and hope that I get to make many more.
Order yours today!
Thanks for reading and looking!!!

Customer pic!!
06/01/2019

Customer pic!!

Just finished up these two beauties recently!!!Hunter/Camper in S35VNMarine 1 in Damascus
05/19/2019

Just finished up these two beauties recently!!!
Hunter/Camper in S35VN
Marine 1 in Damascus

Cross-pull setup for Right handers. (Goes on the outside of your belt, left side, near appendix wear)
05/10/2019

Cross-pull setup for Right handers.
(Goes on the outside of your belt, left side, near appendix wear)

05/10/2019
Damascus Marine 18" overall length
04/29/2019

Damascus Marine 1
8" overall length

03/29/2019

Just a quick clip of me playing with a Cleaver' I had just finished!

This baby is made from 3/16" 1095 HCS,  some carbon fiber, red G10, and some stainless hardware.
03/03/2019

This baby is made from 3/16" 1095 HCS, some carbon fiber, red G10, and some stainless hardware.

GunfighterCustoms
03/03/2019

GunfighterCustoms

This is my version of a Ka-Bar, in 3/16" 1095 HCS, and Camo layered G-10 scales.  The finish is a remnant of the heat tr...
02/02/2019

This is my version of a Ka-Bar, in 3/16" 1095 HCS, and Camo layered G-10 scales. The finish is a remnant of the heat treating process, that I'm experimenting with. The sheath is custom also, coyote kydex and tek-lok. Many other options are available for wear or mounting. Overall length on this one is 11 inches. These can be ordered in any combo of materials!! Shoot me a message anytime for questions or pricing!!

GunfighterCustoms
01/13/2019

GunfighterCustoms

The first Gunfighter Customs push dagger!
01/11/2019

The first Gunfighter Customs push dagger!

Here's what I like to see!
12/24/2018

Here's what I like to see!

Marine 1S90v high carbon stainless steel.175" thickness8" OALCarbon fiber scales, w orange G-10 linersBrass hardware, an...
12/24/2018

Marine 1

S90v high carbon stainless steel
.175" thickness
8" OAL
Carbon fiber scales, w orange G-10 liners
Brass hardware, and custom Eagle, Globe, and Anchor mosaic pin.

243rd Marine Corps Birthday edition EDC knife!Order yours here! Send me a message anytime!
11/12/2018

243rd Marine Corps Birthday edition EDC knife!
Order yours here! Send me a message anytime!

Work in progress. Doin' big things on my mini-mill. I love love love milling on knives!
11/05/2018

Work in progress. Doin' big things on my mini-mill. I love love love milling on knives!

Marines! Check out these custom signs from my friends at T AND F CNC WORKSHOP!
10/31/2018

Marines! Check out these custom signs from my friends at T AND F CNC WORKSHOP!

More marine signs shipped this week! Thanks for the order William Muncy.

Just finished, and mailed these fine specimens out to Brandon Anderson. These are both 3/16" D2 high carbon tool steel, ...
10/22/2018

Just finished, and mailed these fine specimens out to Brandon Anderson.

These are both 3/16" D2 high carbon tool steel, the smaller knife is actually what was left of the bar I cut the Cleaver from.

The scales are both Black/Red Micarta.
The Cleaver has brass pins, a custom EGA mosaic center pin, and a bronze tube. The steak knife has copper pins, and a karambit style finger hole, for playing with at the dinner table. It also doubles as an EDC blade, in the laser engraved kydex sheath.
I'm really pleased with how these turned out!

Here is a matched set of my caping knives, in a custom kydex dual sheath rig. S35VN steelBlack G-10 linersCopper mid lay...
10/06/2018

Here is a matched set of my caping knives, in a custom kydex dual sheath rig.
S35VN steel
Black G-10 liners
Copper mid layer
Carbon fiber mixed with brass scales!
Brass pins, and bronze thong tubes!

This is a custom "custom" Medium sized Tracker, a mod of my Medium Tracker. With an extra 3/4" of blade. For Tim Larson.
09/30/2018

This is a custom "custom" Medium sized Tracker, a mod of my Medium Tracker. With an extra 3/4" of blade. For Tim Larson.

Larson Medium TrackerS35VN high carbon stainless steel7 3/4" OAL3 3/4" BLADEBead blasted finishCoyote/Black scalesCustom...
09/24/2018

Larson Medium Tracker
S35VN high carbon stainless steel
7 3/4" OAL
3 3/4" BLADE
Bead blasted finish
Coyote/Black scales
Custom center pin
Carbon fiber pins and tube
Custom laser engraved kydex sheath

Tactical Mini-Cleaver!S35VN high carbon, stainless steel!MARPAT greens micarta scales!Custom Eagle, Globe, and Anchor em...
09/20/2018

Tactical Mini-Cleaver!
S35VN high carbon, stainless steel!
MARPAT greens micarta scales!
Custom Eagle, Globe, and Anchor emblem pin!
Iwo Jima custom kydex sheath!

Matched set of my tactical caping knife! With a custom rig to wear them on the small of your back, or the front of a pla...
09/06/2018

Matched set of my tactical caping knife! With a custom rig to wear them on the small of your back, or the front of a plate carrier. A light jacket would completely conceal these, or the clips can be reversed, to wear IWB.
I am beyond pleased at how these turned out!

3/16" 1095 high carbon steel
2.5" cutting edge, 3" blade exposed
6 3/4" OAL
Grey/Black G10 scales
Carbon fiber pins
Bronze thong tubes

I am able to do matched sets, and dual blade rigs for just about any model!

09/01/2018

Address

Aberdeen, OH
45101

Telephone

+19377518959

Alerts

Be the first to know and let us send you an email when GunfighterCustoms posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to GunfighterCustoms:

Videos

Nearby non profit organizations


Other Aberdeen non profit organizations

Show All

Comments

I got this as a graduation present for my son. It turned out great and he really likes it. Thanks Jarrod Franklin, your craftsmanship is outstanding!
12" length 7" blade .17" thickness 154 CM high carbon stainless steel Leapordwood scales w/custom Spartan pin Stainless hardware
Absolutely a beast.
Works. like a charm
Best freaking knives on the planet. Great customer service and a shout out to Megan Lynn for all her help. They also turned out to be fantastic friends.
Mail call. Thank you . Turned out great.
C.W.A. Kneck Knife= flying death
C.W.A. Kneck knife getting some on seasoned oak.
C.W.A. Kneck Knife putting work on seasoned oak
Great shop with great customer service.
Here is a peak at one of two custom hatchets I just got.
Here is a peak at one of two custom hatchets I just got.